CUSTOM BUILDING PRODUCTS INC -- PATCHING PLASTER, PP -- 8030-00N057277
===================== Product Identification ===================== Product ID:PATCHING PLASTER, PP MSDS Date:04/10/1987 FSC:8030 NIIN:00N057277 === Responsible Party === Company Name:CUSTOM BUILDING PRODUCTS INC Address:6511 SALT LAKE AVE City:BELL State:CA ZIP:90201 Country:US Info Phone Num:213-582-0846 Emergency Phone Num:213-582-0846 Preparer's Name:TERI JAMESON CAGE:CUSTO === Contractor Identification === Company Name:CUSTOM BUILDING PRODUCTS Address:6511 SALT LAKE AVE. City:BELL State:CA ZIP:90201 Country:US Phone:213-582-0846 CAGE:CUSTO ============= Composition/Information on Ingredients ============= Ingred Name:NON-HAZARDOUS INGREDIENTS OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE/CHRONIC:NONE Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:INHALATION:REMOVE TO FRESH AIR. SKIN/EYE CONT:CAN DEVELOP SUFFICIENT HEAT TO CAUSE BURNS TO SKIN IF A LARGE MASS IS KEPT IN CONTACT WITH SKIN WHILE HANDLING. PARTICLES MAY CAUSE IRRITATION TO EYES. SK IN ABSORPTION:NONE. INGESTION:PLASTER HARDENS WHEN WETTED AND IF INGESTED MAY RESULT IN OBSTRUCTION. SEE PHYSICIAN. Medical Cond Aggravated by Exposure:NONE ======================= First Aid Measures ======================= First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES TO REMOVE PARTICLES. IF IRRITATION PERSISTS, SEE PHYSICIAN. SKIN:WASH WITH SOAP AND WATER. INHALATION:REMOVE TO FRESH AIR. INGESTION:SEE PHYSICIAN BECAUSE OF POSSIBLE BLOCKAGE. ===================== Fire Fighting Measures ===================== Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE ================== Accidental Release Measures ================== Spill Release Procedures:CLEAN UP USING DRY METHODS THAT DO NOT DISPERSE DUST INTO THE AIR. AVOID BREATHING DUST. EMERGENCY PROCEDURES ARE NOT REQUIRED. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:NONE. Other Precautions:NONE. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH/MSHA APPROVED RSPIRATOR FOR NUISANCE DUST. Ventilation:LOCAL EXHAUST. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS . Other Protective Equipment:NONE REQUIRED. Work Hygienic Practices:KEEP SPILLED MATERIALS CLEANED UP. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Vapor Density:HVR/AIR Spec Gravity:2.3 (H*2O=1) Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:SLIGHT Appearance and Odor:WHITE POWDER, NO ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES POSSIBLE REACTIVITY WITH STRONG MINERAL ACIDS. Stability Condition to Avoid:NONE. Hazardous Decomposition Products:REACTION WITH ACIDS WILL EVOLVE CARBON DIOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS . CAN BE TREATED AS COMMON WASTE. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.